flanged Ball Valve

The L port allows one flow to go through one port and the other two to go through the other. Depending on the flow requirements of the application, you can choose between an L port and a T port ball valve. A typical L port ball valve has three ports and an L shape. These valves operate as a diverter without a cut-off position. When the center port is turned an additional 90 or 180 degrees, the valve can be shut off. These valves are often referred to as three-position valves.

Ball valves are available in many variants. One such popular type of ball valve is a 3-way ball valve. The most basic way a three-way ball valve operates is by rotating the ball within the valve body. This rotation aligns the channels of the valve ball with the outlets and inlets. The ball valve stem can be rotated a quarter turn to open or close the bore. The handle has positioned either perpendicular or parallel to the pipe. This position helps the user visualize the status of the valve. Some valves are also designed for automatic shutoffs. This allows them to control valve operation remotely or through a controller. A three-way ball valve can send fluid one way, shut off a flow completely, or mix two different flows. The three-way ball valve is commonly manufactured in T or L-port shapes. Both shapes can be connected to one inlet or outlet, to a single port, or both.

The flange ball valve refers to a ball valve made of the flange material. The ball valve is a widely used new type of valve. The ball valve is mainly used to cut off, distribute and change the flow direction of the medium in the pipeline. It only needs to be operated with a 90-degree rotation and a small turning torque to close tightly.