Seamless Steel Pipe,Stainless Steel Welded Pipe,Stainless Steel Pipe Fittings

Cross

This cross fitting used to connect four lengths of pipe in the same plane with all lengths at right angles to each other. If a branch line passes completely through a tee, the fitting becomes a cross. A cross has one inlet and three outlets, or vice versa.
Read More
Reducing Tee

Tee is a type of pipe fitting which is T-shaped having two outlets, at 90° to the connection to the main line.
Read More
Equal Tee

Tee is a type of pipe fitting which is T-shaped having two outlets, at 90° to the connection to the main line.
Read More
90 Degree Elbow SR

Pipe Elbows are installed between two lengths of pipe or tubing to allow a change of direction, usually at a 90°or 45°angle.
Read More
45 Degree Elbow

Pipe Elbows are installed between two lengths of pipe or tubing to allow a change of direction, usually at a 90°or 45°angle.
Read More
180 Degree Elbow

Pipe Elbows are installed between two lengths of pipe or tubing to allow a change of direction, usually at a 90°or 45°angle.
Read More
90 Degree Elbow LR

Pipe Elbows are installed between two lengths of pipe or tubing to allow a change of direction, usually at a 90°or 45°angle.
Read More
API 3PC Flange Forged steel ball valve

A ball valve is a form of quarter-turn valve which uses a hollow, perforated and pivoting ball to control flow through it. It is open when the ball’s hole is in line with the flow and closed when it is pivoted 90-degrees by the valve handle. The handle lies flat in alignment with the flow when open, and is perpendicular to it when closed, making for easy visual confirmation of the valve’s status Application scope: petroleum chemical industry, electric power, metallurgy, medicine, real estate, municipal engineering and other industries.
Read More
Full-Welding Ball Valve

Read More
3-WAY L PORT BALL VALVE

The L port allows one flow to go through one port and the other two to go through the other. Depending on the flow requirements of the application, you can choose between an L port and a T port ball valve. A typical L port ball valve has three ports and an L shape. These valves operate as a diverter without a cut-off position. When the center port is turned an additional 90 or 180 degrees, the valve can be shut off. These valves are often referred to as three-position valves.
Read More
V-NOTCH VALVE

Read More
JIS Flange Cast Steel Swing Check Valve

A check valve, clack valve, non-return valve, reflux valve, retention valve or one-way valve is a valve that normally allows fluid (liquid or gas) to flow through it in only one direction. Application scope: petroleum chemical industry, electric power, metallurgy, medicine, real estate, municipal engineering and other industries.
Read More

Products

Welded Steel Pipe

Seamless Steel Pipe

Steel Flange

Pipe Fittings

Gasket & Rings

Valve