thread gate valves

The opening and closing part of the stainless steel gate valve is a gate. The direction of movement of the gate is perpendicular to the direction of the fluid. The gate valve can only be fully opened and fully closed. The gate has two sealing surfaces. The two sealing surfaces of the most commonly used gate valves form a wedge shape. The wedge angle varies with the valve parameters, usually 50, and 2°52 ‘when the medium temperature is not high. The gate of the wedge gate valve can be made into a whole, called a rigid gate; it can also be made into a gate that can produce a small amount of deformation to improve its processability and make up for the deviation of the sealing surface angle during processing. The plate is called a spring gate. Gate valves material is divided into a 304 stainless steel gate valve, 316 stainless steel gate valve, 321 stainless steel gate valve. The expression method is Z41H-16P.